C&K systems System 238 Manuel d'installation télécharger pdf (Page 16)

SYSTEM 238 Installation Manual

Command Location 2A: Event Reporting

(1) (2) (3) (4) (5) (6)

11A1D1

Default Values



0 = Receiver 1 with Receiver 2 as back-up

1 = Receiver 1 only

2 = Receiver 2 only

3 = Receiver 1 and Receiver 2 (Dual Reporting)

Digit Position (2): Restore Receiver Select

See Digit Position (1) for programming options.

The panel will add a fixed extension digit when reporting in 3/1 Extended, 4/2, and CFSK formats.

Fixed codes are listed below.

Program a 0 to disable Unit Status Reporting.

See Digit Position (1) for programming options.

Valid entries are 0 - F.

The panel will add the User ID # as the second digit when reporting in

3/1 Extended, 4/2, and CFSK formats.

Program a 0 to disable Cancel Reports.

Digit Position (1): Shunt Receiver Select

Digit Position (3): Unit Status Report Code

Valid entries are 0 - F.

Digit Position (4): Unit Status Receiver Select

Digit Position (5): Cancel Report Code

Digit Position (6): Cancel Report Receiver Select

See Digit Position (1) for programming options.

1 = Low battery

2 = AC fail

3 = Bell fuse fail

4 = Loop trouble

5 = Failed to communicate

6 = Battery restore

UNIT STATUS FIXED EXTENSION CODES

7 = AC restore

8 = Bell fuse restore

9 = Loop trouble restore

A = not used

B = Watchdog reset

C = Completed programming

Command Location 2B: Test Report

(1) (2) (3) (4)

00 16

Default Values



Digit Positions (1) and (2): Test Report Code

Valid entries are 0 - F.

Only Position (1) is sent for 3/1 and 4/1 formats.

Positions (1) and (2) are sent for 3/1 Extended, 4/2, and CFSK formats.

Program 00 to disable Test Reports.

Digit Positions (3): Test Report Receiver Select

0 = Receiver 1 with Receiver 2 as back-up

1 = Receiver 1 only

2 = Receiver 2 only

3 = Receiver 1 and Receiver 2 (Dual Reporting)

Digit Positions (4): Test Report Interval

1 = 1 hour

2 = 2 hours

3 = 4 hours

4 = 12 hours

5 = 24 hours

6 = 7 days

7 = 14 days

8 = 21 days

9 = 30 days

0 = 1 hour if armed

1 = 2 hours if armed

2 = 4 hours if armed

3 = 12 hours if armed

4 = 24 hours if armed

PROGRAMMING CONVERSIONS

Hexadecimal Value

Key Strokes

Commentaires sur ces manuels

Pas de commentaire

C&K systems System 238 Manuel d'installation Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité C&K systems System 238