C&K systems System 236i Manuel d'installation télécharger pdf (Page 20)

SYSTEM 236 Installation Manual

Command Location 24: Shunting Enable

111111

(1) (2) (3) (4) (5) (6)

Default Values

Digit Position (1): Loop 1 Shunting Enable

0 = No: makes this zone a priority zone (not shuntable)

1 = Yes: authorized users can bypass or force arm

Digit Position (2): Loop 2 Shunting Enable

Refer to Digit Position (1) for programming options.

Digit Position (3): Loop 3 Shunting Enable

Refer to Digit Position (1) for programming options.

Digit Position (4): Loop 4 Shunting Enable

Refer to Digit Position (1) for programming options.

Digit Position (5): Loop 5 Shunting Enable

Refer to Digit Position (1) for programming options.

Digit Position (6): Loop 6 Shunting Enable

Refer to Digit Position (1) for programming options.

Command Location 25: Delay Before Dial Enable

000000

(1) (2) (3) (4) (5) (6)

Default Values

Digit Position (1): Loop 1 Delay Before Dial Enable

0 = No

1 = Yes: this loop will delay dialing on alarm for time programmed in CL 1B (4)

Digit Position (2): Loop 2 Delay Before Dial Enable

Refer to Digit Position (1) for programming options.

Digit Position (3): Loop 3 Delay Before Dial Enable

Refer to Digit Position (1) for programming options.

Digit Position (4): Loop 4 Delay Before Dial Enable

Refer to Digit Position (1) for programming options.

Digit Position (5): Loop 5 Delay Before Dial Enable

Refer to Digit Position (1) for programming options.

Digit Position (6): Loop 6 Delay Before Dial Enable

Refer to Digit Position (1) for programming options.

Command Location A0: Test Report Countdown Timer

(1)

Digit Position (1): Set Test Report Countdown Timer

This command sets the time when the first Test Report is transmitted to the central station. The SYSTEM 236 will

use this transmission time whenever it is powered up or the CPU is reset

(unless CL A0 is reprogrammed).

Example:

The time is 1500 hours (3:00 pm). You want the first Test Report to

transmit at 0100 hours (1:00 am). 3:00 pm + 10 hours = 1:00 am.

Program the value "8" in Position (1) of CL A0.

0 = 1/4 hour

1 = 1/2 hour

2 = 1 hour

3 = 2 hours

4 = 3 hours

5 = 4 hours

6 = 6 hours

7 = 8 hours

8 = 10 hours

9 = 24 hours

0 = 14 hours

1 = 16 hours

2 = 18 hours

3 = 20 hours

4 = 22 hours

5 = 24 hours

CL 24 - 25 and A0

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire

C&K systems System 236i Manuel d'installation Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Claviers numériques C&K systems System 236i